< Marsh Bellofram Group of Companies < Bellofram Precision Controls < Air Regulators < Subminiature Regulators < T-92
T92 subminiature Regulator
Downloadable Files:
Type 92 (132 KB)
Type 92 SUBMiniature Regulators
  • Designed for applications with limited space and for
    low flow or dead end service
  • Small package size and lightweight construction
  • Standard or low bleed versions available
  • Corrosion resistant anodized aluminum exterior
  • Excellent stability and repeatability
  • Self relieving
  • Low cost
Product Detail:

Type 92

With the new Type 92, Marsh Bellofram has created a subminiature regulator with a true rolling diaphragm design. Most subminiature
regulators utilize a flat diaphragm, which in this small of a regulator causes excessive droop and low stability. By utilizing a larger diameter rolling diaphragm, the Type 92 regulator offers a more sensitive regulator with excellent stability and significantly less droop.
The Type 92 Subminiature Regulator is a compact, low-cost unit which operates in pressure ranges up to 100 psi, with a maximum supply
pressure of 150 psi. It provides dependable reliability and accuracy for low flow or dead end applications. The Type 92 subminiature regulator is available with a corrosion resistant anodized aluminum body and bonnet. Comes standard with a fluorocarbon diaphragm.
Part Numbers:
 
Part Number
Port Size (NPT)
Set Point Range
BAR
psig
T92
960-540-000
1/16 NPT
0-0.3
0-5
960-541-000
0-1.0
0-15
960-542-000
0-2.1
0-30
960-543-000
0-4.1
0-60
960-544-000
0-6.9
0-100
Options:
Replace the last three digits of the part number with digits from the table below. If more than 2 combination needed, Consult Factory.
OPTION
Non-Relieving
002
032
Slotted Adj. Screw
003
Barbed Fittings
Port
Size
Part Number
In/Out Port
1/16-27 NPT
622-000-007
Gauge Port
10-32 UNF
622-000-031
   
Product Contact:
Sales Contact
Technical Contact
Specifications:
TYPE 92 Regulator
Effect of Supply Pressure variation (25 psig) on Outlet Pressure
< 0.5 psig
(35.5 mBAR)
Exhaust Capacity (5 psig above 20 psig set point)
0.1–0.3 SCFM Typical (2.8-8.5 LPM)
Max. Supply Pressure
150 psig (10.3 BAR)
Flow Capacity at 100 psig (6.9 BAR) supply and 20 psig (1.4 BAR) outlet
5 SCFM (141 LPM)
Output Pressure Ranges
0-5 psig
(0-0.35 BAR)
0-15 psig
(0-1.0 BAR)
0-30 psig
(0-2.1 BAR)
0-60 psig
(0-4.1 BAR)
0-100 psig
(0-6.9 BAR)
Total Air Consumption @ Maximum Output
0.3 SCFH (0.14 SLPM) (1.42 LPM)
Port Size
1/16 NPT - Side and Bottom Ports
Materials of Construction
Body: Anodized Aluminum
Bonnet: Anodized Aluminum
Trim: Acetal, Brass, Stainless Steel
Diaphragm: Fluorocarbon with Polyester Fabric
Knob: Acetal Resin
Spring: Stainless Steel, Music Wire
Size & Weight
1.19" X 1.19" X 3.55"
(30.2 X 30.2 X 90.2 mm)
2.8 oz.
(0.08 kg)
Mounting Options
Pipe or panel
• Marsh Instruments • BelGAS • Bellofram Diaphragm • Automatic Timing & Controls • Diversified Electronics • DigiTec Division • Thermo-Couple Products