< Marsh Bellofram Group of Companies < Bellofram Precision Controls < Electro Pneumatics < T-5000
Type 5000 P/I Transducer
Downloadable Files:
Type 5000 Brochure
Catalog Pgs. (204 KB)
Type 5000 P/I Transducers
  • 0.1% Accuracy Typical
  • Piezoresistive Pressure Transducer[MC4] <#_msocom_4> Resists Vibration
  • Mounts at Any Angle
  • Easily Accessible Zero and Span Adjustments
  • NEMA 4X Housing Approved for Explosion-proof Service
  • FM Approvals for :
  • Explosion Proof Service
    (Class 1, Divisions 1 and 2, Groups B, C & D)
  • Dust Ignition-proof Service
    (Class II, Divisions 1 and 2, Groups E, F & G)
  • Class III, Divisions 1 and 2. Equivalents to the Above Approvals Have Been
Product Detail:

The Marsh Bellofram Type 5000 is a compact, rugged and reliable two-wire pressure transmitter, expressly designed for industrial field service. This precision unit converts a signal pressure input into a precise 4-20 mA or 10-50 mA output. The lightweight housing includes a 1/4 NPT pressure port and 1/2 NPT conduit port for field wiring. Connections are easily accessible via top cover removal. Zero and span adjustments are available within the field wiring compartment for fine, on-site calibration adjustment. The Type 5000 pressure transmitter uses a unique, temperature compensated piezoresistive transducer, suitable for gauge pressure measurement of non-corrosive liquids and gases. The sensor has excellent dynamic response and is virtually insensitive to mounting orientation and ordinary industrial vibration. Mounting holes on the transmitter housing are arranged to permit direct pipe (2") mounting for minimum installed cost.

Applications
• Industrial Field Service
• Oil & Gas
• Chemical Processing
• Pharmaceutical
• Industrial Automation
• Power Generation

Part Numbers:
Create Part Number:
9
6
4
X
X
1
00X
   
0
   0-15 psig (0-1.0 BAR) Input
1
   3-15 psig (0.2-1.0 BAR)
2
   3-27 psig (0.2-1.9 BAR)
3
   6-30 psig (0.4-2.1 BAR)
4
   0.2-1.0 BAR (3-15 psig)
5
   0-100 psig (0-6.9 BAR)
 
0
   4-20 mA Output
1
   10-50 mA
 
1
   X/P FM/CSA Agency Approval
 
000
 None Options
001
 Pipe Clamp Mounting Kit
Options:
Consult Factory.
   
Product Contact:
Sales Contact
Technical Contact
Specifications:
Input signal
0–15 psig
3–15 psig
3–27 psig
6–30 psig
0.2–1.0 BAR
0–100 psig
0–1.0 BAR
0.2–1.0 BAR 0.2–1.9 BAR
0.4–2.1 BAR 3–15 psig
0–6.9 BAR
Output Signal

4–20 mA DC, 2 wire
10–50 mA DC, 2 wire
Output Protections
Reverse polarity protected
Accuracy
includes nonlinearity, hysteresis and non-repeatability
± 0.1% span typical;
± 0.25% span max.
Overpressure
45 psig (3.1 BAR) without calibration shift 60 psig (4.1 BAR) without failure
Allowable Loads
See Graph
Response Time
Less than 10 msec for step change to 99%R
Temperature Range-Operating
-40º F to +180º F 
(-40º C to +82º C)
Temperature Effect
Zero - Less than ± 0.01% R/ºF
Span - Less than ± 0.01% R/ºF
RFI Effect
Less than 1% R at 10V/meter per
SAMA PMC 33.1, 2-abc
Power Supply
12–30 VDC
Power Supply Effect
Less than 0.005% per volt change at the input terminals within specified power supply limits
Calibration Adjustments with ± 25% min. adjustment
Multi-turn Zero and Span potentiometers
In-Process Output Monitoring
Via test jacks within enclosure without disturbing field wiring
Connections
1/4 – 18 NPT female pressure input,
1/2 – 14 NPT female electrical output
Mounting
Suitable bracket or optional 1/4–20 U-bolt
pipe mounting kit
(P/N 971-109-860)
Finish
Epoxy coated aluminum body and cover
Weight
1.7 lbs. (0.8 kg)
• Marsh Instruments • BelGAS • Bellofram Diaphragm • Automatic Timing & Controls • Diversified Electronics • DigiTec Division • Thermo-Couple Products